Rated Voltage; Using Extension Cords; Use Of The Machine With Various Items Of Equipment; Gears And Corresponding Core Bit Diameters - Hilti DD 160 Manual De Instrucciones

Rated speed under no load
Protection class
Rated power (at 230 V)
Max. permissible water supply pressure
4.2

Rated voltage

The product is available with various voltage ratings. Please refer to your product's type identification
plate for details of its voltage and input power ratings.
Rated voltage 100 V
Rated current
15 A
input
AC frequency 50/60 Hz 50/60 Hz 50/60 Hz
4.3

Using extension cords

Use only extension cords of a type approved for the application and with conductors of adequate gauge.
Recommended minimum conductor cross-sections and maximum power cord lengths:
Conductor cross-
section →
↓ Mains (AC) voltage
100 V
110 V
127 V
220 V
230 V
240 V
4.4

Use of the machine with various items of equipment

Equipment
Without water collection system
without dust removal system
With water collection system
without dust removal system
With water collection system
With dust removal system
4.5

Gears and corresponding core bit diameters

Gear
1
2
3
28 English
Printed: 09.08.2019 | Doc-Nr: PUB / 5069586 / 000 / 08
110 V 110 V 120 V
GB TW
16 A 15 A 19.5 A
60 Hz
1.5 mm² 2.5 mm²
Not Not
recommended recommended
Not 15 m
recommended
Not 20 m
recommended
35 m 65 m
40 m 70 m
40 m 70 m
Core bit diameter
25 mm ... 202 mm
25 mm ... 162 mm
25 mm ... 162 mm
Core bit diameter
152 mm ... 202 mm
72 mm ... 142 mm
25 mm ... 67 mm
3rd gear 1,690 /min
Protection class I (earthed)
2,200 W
5 bar
127 V 220 V
18.5 A 10 A
50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
3.5 mm²
25 m
Not
recommended
Not
recommended
Not
recommended
Not
recommended
Not
recommended
Drilling direction
Not upwards
Not upwards
All directions
Idling speed
460 /min
760 /min
1,690 /min
434951
*434951*
230 V 240 V
10.3 A 9.9 A
4.0 mm²
Not
recommended
30 m
35 m
105 m
Not
recommended
110 m