Attaching The Strap; Attaching The Hand Strap; Attaching The Shoulder Strap (Purchased Separately) - FujiFilm instax SQUARE SQ10 Manual De Instrucciones

Attaching the Strap

Attaching the Hand Strap

Attach the strap as illustrated below.
• When you carry or use the camera, put the strap around
your wrist so that the camera does not drop.
Attaching the Shoulder Strap
(Purchased Separately)
Attach the strap clips to the camera, then attach the
shoulder strap.
~
Open a strap clip.
Use the clip attaching tool to open a strap clip as
shown.
Keep the tool in a safe place. You will need it to
open the strap clips when removing the shoulder
strap.
Ÿ
Place the shoulder strap clip on each
strap eyelet.
Hook the strap eyelet in the clip opening. Remove the
tool using the other hand to keep the clip in place.
!
⁄
Caution
• Use the strap only as a shoulder strap. Do not put the
shoulder strap around your neck.
• Be careful so that the shoulder strap does not obstruct
the film ejection slot.
• Strap eyelets may become worn or color may become
faded as you are attaching the shoulder strap.
Pass the clip through
each strap eyelet.
Rotate the clip fully through the
eyelet until it clicks closed.
Pass the shoulder
strap through each
clip.
EN
7