Music Player Initial Setup - Teac AG-H600NT Manual Del Usuario

Initial setup
When you use the Music player function for the first time, the unit
starts an initial setup procedure to connect to the LAN.
1
Select Music Player by pressing the SOURCE button
1
repeatedly.
< You can also use the BAND button on the remote control unit.
2 Select "Shared media" or "Shared folders".
Turn the MULTI JOG/ENTER knob to select the item, and then
press the MULTI JOG/ENTER knob.
Shared media
Shared folders
Select your country/area.
3
Turn the MULTI JOG/ENTER knob to select the item, and then
press the MULTI JOG/ENTER knob.
Most of Europe
USA
28

Music Player Initial Setup

2 3 4
T
T
4 Select a network name you want to use.
Turn the MULTI JOG/ENTER knob to select the item, and then
press the MULTI JOG/ENTER knob.
005AD904JM2
[Wired]
< To use a wired Internet connection, select "[Wired]".
Enter the correct password for the network if required.
5
< See "How to input characters" page19.
< If you have a problem connecting to the LAN, see page 23.
Now the unit starts to connect to the LAN.
When connection is established successfully, the Music Player
menu is displayed.
T