Prior to carrying out the cleaning operations,
make sure that the supply plug has been dis-
connected from the mains and, also, wait for
the machine to cool.
Do not leave water in the tank and water circuit for
more than 3 days. If this is the case, drain the tank
and circuit, rinse it and refill it with fresh water, then
carry out a delivery without capsule before making
any coffee or other beverage.
Empty and clean the drop collecting tray once
every one or two days or, in any case, when it is full.
Do not use ovens (microwave or traditional ones) to
dry the machine (or any part of the same). Do not
use alkaline cleaners, solvents, alcohol or aggressive
substances.
Do not dip the machine into water.
All of the machine components that cannot be
removed (except for the electric ones) shall, unless
otherwise specified, be washed by means of non-
abrasive cloths or sponge moistened with cold or
warm water.
Do not use a dishwasher to clean the components.
MAINTENANCE AND CLEANING
CLEANING THE DROP / USED POD
COLLECTING TRAY
1
Remove and empty the drop / used pod collect-
ing tray.
2
Rinse the components with cold water, then dry
and fit them back into their proper places.
E N
19