Battery; Components; Label, Rear Side; Connecting The Battery - BrandTech HandyStep touch Instrucciones De Manejo

a.
60

Battery

Damaged or incorrect battery
Possible personal injury
 Use only the original battery.
 Use only the original power adapter.
 Do not puncture, bend, ignite, compress, short circuit or
overheat.
 Do not touch a leaking battery.
 Dispose of damaged batteries in accordance with legal
requirements.
 Do not store or operate the battery at a temperature
above 60 °C (140 °F).
 Follow the instructions on the battery.
 Charge the battery completely before the first use or if you have not used
the device for an extended time. This prevents premature wear of the
battery.
 Replace the battery after its service life has been exceeded (~ 3 years), in
case of deformation or in the event of extremely short charging cycles and
a resulting shorter duration of use.
 When storing the device for extended periods, disconnect the battery plug.

Connecting the battery

b.
Open the cover and connect the battery's reverse polarity protected plug
firmly and straight into the socket. The device switches on when you have
connected the battery. Then close the cover.
WARNING
NOTICE

Components

1. Battery
2.
Contacts
3. Reverse polarity protected
plug
4. Cable

Label, rear side

1. Battery type and use
2. Part identification
3. CE marking
4.
Warning label
c.