Discarding The Residual Volume; Ejecting The Tip; Switching The Operating Mode With A Filled Tip; Setting The Volume - BrandTech HandyStep touch Instrucciones De Manejo

72

Discarding the residual volume

After dispensing all of the available STEPs, liquid with a volume of less than
1 STEP remains in the tip. The device automatically switches into the mode,
in which you can discard the remaining volume.
a. Press and hold the STEP button.
 The tip is emptied completely.

Ejecting the tip

Condition
 You have emptied the tip
a. Hold the device with the tip
over the waste bin.
b. Tap on , then press the STEP
button.
 The tip is ejected.
 The device moves into tip loading
position.
Switching the operating mode with a filled tip
You can switch from one operating mode to another via the You can switch from one operating mode to another via the
operating mode options
device saves the activated settings (e.g. STEP volume, speed).
If you would like to switch to another operating mode with a filled tip via the If you would like to switch to another operating mode with a filled tip via the
button, you will be asked if would like to empty the tip before switching.

Setting the volume

Condition
 An operating mode has been selected.
a. Tap on the button.
 The volume setting appears.
Set the volume by selecting a volume from
the range of values.
b. Swipe to the left or right to change the
position.
c. Swipe upward or downward to set the value.
d. Confirm the setting by tapping the
button. Discard the setting by pressing the
X button.
 The operating mode appears.
(specific operating modes only). In doing so, the
STEP
button or via
01.00
0
1
2
3
4
5
6
7
8
9