Setting The Aspiration And Dispensing Speed; Settings; Language; Device - BrandTech HandyStep touch Instrucciones De Manejo

Setting the aspiration and dispensing speed

Adjust the speed to your respective application.
Condition
 An operating mode has been selected.
a. Tap on the button.
 The speed setting appears.
b. Set the aspiration and dispensing speed
by selecting a speed from the value
range 1 ... 8.
1 = slow, 4 = medium, 8 = fast
You can set different speeds for aspira-
tion and dispensing.
c. Confirm the selection by pressing the
button. Discard the setting by pressing
the X button.
 The operating mode appears again.
The device saves the speed settings for each tip size and mode. The
speed settings can be adjusted again in the operating mode. By doing
this, however, you change the previous speed setting for the tip size
being used.
Configure your device for daily usage. Tap on 'Settings' in the main menu.

Language

Set the display language and the help language. The available languages
are German, English, French, Spanish and Chinese.

Device

Set the device name. To select characters, drag these
to the white bar with your index finger. To change po-
sition, swipe to the left or right. The device name can
consist of letters, numbers and special characters.
To add uppercase letters, tap on the ABC button.
To add lowercase letters, tap on the abc button.
To add numbers and special characters, tap on the 123
button. The following special characters are available:
plus, minus, underscore, comma, period, space (be-
tween the number 9 and minus)
NOTICE

Settings

73