Dispensing Liquid; Handling Residual Volumes; Presetting The Step Count; Options - BrandTech HandyStep touch Instrucciones De Manejo

Auto-Dispensing (AUTO-DISP)

76

Dispensing liquid

Condition
 See „Dispensing liquid" → 71
 After pressing the STEP button, the After pressing the STEP button, the
number of STEPs to be dispensed (
decreases.

Handling residual volumes

For information on handling residual volumes, see „Switching to emtying"
→ 71 and „Aspirating liquid" → 70 .

Presetting the STEP count

See Options > 'Preset Step Count'.

Options

a. In the operating mode, tap on the symbol
 The Options menu appears.
Option
Favorites
'Preset Step Count'
'Go To Auto-Disp'
'Help Work Mode'
For information on the function of this mode, see „Overview of modes"
→ 65.
For information on setting the volume, speed, and other operating
steps found in all modes, see „Operation" → 67.

Automatically dispensing liquid

Condition
 You have set the pause time (an interval between liquid dispensing steps)
manually or automatically.
a. Press and hold the STEP button.
 Liquid is dispensed automatically, as long as the STEP button is held
down or as long as enough liquid is present in the tip.
 While liquid is being dispensed, the pause time counts down on the
touchscreen display.
b. On the touchscreen display, you see the remaining STEPs.
)
Meaning
Add active settings to Favorites. You can open these
again from the main menu under Favorites.
Preset the STEP count.
Switch to Auto-Disp mode. The volume set in Mul-
ti-Disp mode is also set in Auto-Disp mode.
Shows the help text for the mode.
.