Date / Time; Display & Energy; Sounds; Firmware Information (Info/About) - BrandTech HandyStep touch Instrucciones De Manejo

74

Date / time

Set the date, time and the time and date format.
To exit this function, tap on the
The following abbreviations describe the time and
date formats (value range in parentheses):
hh (00 ... 23)
mm (00 ... 59)
DD (01 ... 31)
MM (01 ... 12)
YYYY (2019 ... 2050)
Display & energy
'Brightness' Adjust the brightness level via the switch.
'Display Time- To conserve energy, set the amount of time before the display
out' times out. The following values can be set: 30 s, 1 min, 2 min,
5 min.
When the device has been idle for the set time, the display
dims. The set time expires. The device then goes into Standby
mode. Ending timeout, see „Exiting Standby mode" → 61
'Auto Power Set whether the device shuts off automatically after 10 min-
Off' utes.

Sounds

Turn sounds (system/STEP button) on/off via the switch.

Firmware information (info/about)

Information about the firmware of the device can be
found via this menu item.
The 'Build version' is the firmware version.
The 'Build date' is the date the firmware was created.
button.
h (0 ... 23)
m (0 ... 59)
d (1 ... 31)
M (1 ... 12)
YY (19 ... 50)
Hour
Minute
Day
Month
Year