Roadstar CLR-2495P Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
until the minute digits to be preset are displayed.
-
Focus setting : To adjust the projection clock definition by turning
the FOCUS (23) until the project's time is clearly shown on the
ceiling or wall.
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
TO SET OR RESET THE ALARM TIME
1. Press and hold the ALARM SET/OFF button (5).
2. While holding the ALARM SET/OFF button (5) press the HOUR
SET button (9) and MINUTE SET button (10) to advance the time
until the desired alarm time is shown on the display.
TO SET THE ALARM TO WAKE TO RADIO
1. Set the alarm time as previously instructed. Select a radio station
and make sure the VOLUME is set as desired.
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When
the actual time on the clock matches the selected preset alarm
time, the unit automatically turns on for 1 hour and 59 minutes
and then shuts off. The time of the porjection does not trigger the
alarm.
English
5
6
Notes :
-
-
TO SET THE ALARM TO WAKE TO BUZZER
1. Set the alarm time as previously instructed. Slide the VOLUME /
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When
TO SHUT ALARM OFF
1. To shut off the alarm, press the ALARM SET/OFF button (5) once
English
To shut off the alarm, press the ALARM SET/OFF button (5) once
and alarm time will be reset for the next day. Slide the ON/OFF/
AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.
The radio can be temporarily turned off manually by pressing the
SNOOZE button (4); the radio will turn back on automatically 9
minutes later.
BUZZER (11) knob to the BUZZER position; a click is heard and
the buzzer will now be activated.
the actual time matches the selected preset alarm time, the unit
automatically turns on for 1 hour and 59 minutes and then shuts off.
and alarm time will be reset for the next day. Slide the ON/OFF/
AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.

Publicidad

Tabla de contenido
loading

Tabla de contenido