Rain Bird WTD 2900 Manual Del Propietário página 9

WTD 2900
English
Important:
- Position your hose timer in vertical position only.
- Make sure that the filter is correctly positioned
inside the plastic nut (G).
- Do not use any chemical products or Teflon tape
on the thread when installing the hose end timer
on the faucet. The filter has a build-in seal to
prevent leakage.
- Start screwing by hand the plastic nut (G) on the
faucet.
- Warning: The nut should screw very easily on
the faucet during at least the first 2 turns. If not,
this means that the timer in not correctly aligned
with the outlet of the faucet. Unscrew it and try
again carefully.
- After at least 2 turns, the nut should start to be
more difficult to turn. Tighten it one more turn
by hand only. Do not use any tools that could
damage the thread.
- Warning: If you connect a hose at the bottom
of the timer, do not pull on the hose: It might
damaged the timer.
5. MANUAL WATERING MODE
You can also start watering manually
2 OPTIONS :
Option 1.
To turn off AUTO mode, press FAUCET ICON, then set timer to MANUAL mode.
A flashing hand and On or OFF will appear. The Faucet Icon will be displayed to indicate ON/OFF
status.
To resume AUTO mode, press MODE. Timer displays current time and day.
Option 2.
Press the AUTO ON-OFF key to activate the MANUAL mode. A small, open faucet symbol appears.
Press the AUTO ON-OFF key a second time to deactivate the MANUAL mode and to go back to
AUTO mode.
www.rainbird.eu
G
H
7