Tristar BQ-2816 Manual De Usuario página 5

1 2
Place the stand feet (10A) into the Place the washer (16) onto the
stand base (10B) properly. You will stand base and install the screws
hear a "click" sound when the foot (17) into the washer to fix the
is fixed well. stand feet and stand base firmly.
6 7
5
Place the bowl-shaped base of the Put the grease tray (4) into the
appliance (5) onto the grill stand. appropriate slot in the base of the
Make sure that the grill stand is appliance. The grease tray can be
placed on a dry flat, stable surface. filled with some water to make it
easier to clean.
3
16
17
Turn half of the threaded rod (a) in
the lower tube (9), put the decorative
ring (8) on the lower tube (9) and
assemble both tubes together;
ensure that they are fixed well.
8
5
4
Place the grill plate (3) on the base
of the appliance (5). First of all insert
the appliance socket (15) into the
appropriate opening in the base (12),
then place the grill plate horizontally
on the appliance base.
4
7
8
a
9
Connect the grill stand base (10)
and the lower tube (9) together to
form the complete grill stand. The
grill can be used with or without
this stand.
9
3
Place the hood (1) into the base.
Position the hood as a wind
breaker when you use the grill in
the open air.
Barbecue-grill
Note: this section is only for the
5
BQ-2815
9
7
10
b
Install the screw (b) into upper
tube (7) and put the condiment
tray on the upper tube. Make sure
that the tray is fixed well.
10
1
13
Push the detachable thermostat
(13) as far as it will go into the
grill's appliance socket.
EN
5