Initial Use - Beurer BC 28 Instrucciones De Uso

Information on the display:
1. Systolic pressure
2. Risk indicator
3. Diastolic pressure
4. Calculated pulse rate
5. Cardiac arrhythmia
symbol
6. Pulse symbol
7. User memory /
8. Memory space number/
memory display for
average value ( A ) , morning ( AM ) , evening ( PM )
9. Battery replacement symbol
10. Time and date
11. Release air (arrow)

6. Initial use

Inserting the battery
• Remove the battery compartment lid on the left side
of the device.
• Insert two 1.5 V micro (alkaline type LR03) batteries.
• Make sure that the batteries are inserted the correct
way round in accordance with the markings. Do not
use rechargeable batteries.
• Carefully close the battery compartment lid again.
If the battery replacement symbol
you can no longer perform any measurements and must
replace all batteries.
Setting the hour format, date and time
It is essential that you set the date and time. Otherwise,
you will not be able to save your measured values cor-
rectly with a date and time and access them again later.
There are two different ways to access the menu
from which you can adjust the settings:
27
is displayed,