Mounting Controller - Rain Bird STP-400i Manual De Instrucciones

Mounting Controller

Follow these instructions to mount STPi Controller:
Step 1
Drive a screw into
the wall, leaving a
4mm gap between
screw-head and wall
as shown in Figure 1
(you can also use the
supplied wall anchors
if necessary).
Figure 1
Step 2
Hang the Controller
on the exposed screw.
Step 3
Remove access
cover at bottom of
Controller and drive
a screw through the
center hole into the
wall as shown in
Figure 2.
Figure 2
10
STPi Controller Operation Manual
637589-01 Rev 1 (STP user manual (INTL)) source.indd 10 6/26/2008 2:19:05 PM