Care And Maintenance; Connecting To A Power Source - Trevi HF 1900 BT Manual De Usuario

ENGLISH
• The apparatus shall not be exposed to dripping or splashing water. No objects filled with liquid, such as vases, should be placed
on the unit.
• No naked flame sources, such as lighted candles, should be placed on.
• Keep this manual.

CARE AND MAINTENANCE

For cleaning we recommend the use of a soft, slightly damp cloth. Avoid solvents or abrasives.
IMPORTANT
The good construction of this machine guarantees the perfect functioning for a long time. However, should present some inconve-
nience, you should consult your nearest authorized service center.

CONNECTING TO A POWER SOURCE

This unit works with 15V
Note: Unless otherwise noted, command descriptions are given for a device that for the remote control.
ON/OFF
1. Plug the power cord into the power socket (24) on the device and the power adapter into a power outlet.
2. Press the STANDBY button (2). The device will turn on.
3. Press the STANDBY button (2) to switch the system to standby mode.
VOLUME, TONE AND BALANCE CONTROL
1. Turn the VOLUME Control (15) on the unit or press the VOL + (13) or VOL- (12) on the remote to increase or decrease the
volume.
2. Turn the BASS control (12) to increase or decrease bass.
3. Turn up the TREBLE control (9) to increase or decrease the treble.
4. Turn the BALANCE control (6) to adjust the balance of left and right speakers.
FM RADIO, FUNCTION
1. Turn on the unit and press the SOURCE button (5) until the display on the display and the frequency.
2. Press the keys :/TUN+ (11) or 9/TUN- (8) on the unit, or the keys :/TUN+ (9) or 9/TUN- (4) on the remote control to
increase or decrease the frequency of 0.05MHz and make a step-by-step search.
3. Press and hold for a few seconds the keys :/TUN+ (11) or 9/TUN- (8) on the unit, or the keys :/TUN+ (9) or 9/TUN- (4)
on the remote control to tune to next or previous radio station with the best signal.
4. To store a radio station:
- Navigate to the frequency to be stored, press the CLK SET, MEM/PROG (13) button on the unit, or MEM/CLK SET, PROG
(1) button on remote control.
- With REPEAT/M- (14) or M+/10+/FOLDER (16) buttons on unit, or MEM-/10- (5) or MEM+/10+ (10) buttons on
remote control, select the desired preset number where you want to save the radio station.
- Press the CLK SET, MEM/PROG (13) button on unit, or MEM/CLK SET, PROG (1) on remote control to confirm.
- The device can store up to 20 radio stations.
Note: To get the best FM reception, extend and turn the aerial (22). If the reception is not good try setting different length and
orientation of the antenna, however, the quality of the FM reception depends on the place where you place the unit.
10
3A power adapter (supplied). Do not connect the appliance to sockets with a voltage other than specified.
HF 1900 BT