Program Play - Trevi HF 1900 BT Manual De Usuario

ENGLISH
CD-MP3 PLAYER FUNCTION
LISTENING TO A CD
1. Turn on the unit and press SOURCE button (5) until the display reads CD, which indicates the loading of the disc. In case of
absence of the disc, display will show no.
2. Open the CD compartment by pressing the button (18) on the unit, or OPEN/CLOSE (7) button on the remote control and insert
the disc into the CD tray (19), with the label facing up. Close the door by pressing the button (18) on the unit, or OPEN/CLOSE
(7) button on the remote.
3. After a few seconds the display (17) will show the number of tracks on the disc and auto start to playback. Playback will start
automatically. The display (17) will always show and only the number of the track being played.
4. Press/PAIR (10) button on unit or/PAIRING (6) button on remote control, the disc will pause and play indicator
blink on the display. Press/PAIR (10) button again to resume playback.
5. Press the button (7) on the unit or
CHANGE TRACKS AND SEARCH DURING PLAYBACK
1. Press :/TUN+ (11) or 9/TUN- (8) on unit, or :/TUN+ (9) or 9/TUN- (4) buttons on remote control for select previous or
next track.
2. Press and hold :/TUN+ (11) or 9/TUN- (8) buttons on unit, or :/TUN+ (9) or 9/TUN- (4) buttons on remote control, while
listening to quickly search for a particular musical passage. Release the button to return to normal playback.
REPEATING PLAYBACK OF A TRACK OR A CD
Press the REPEAT button on the main unit or remote control to circle the play mode:
• Repeat 1 --- Press the REPEAT (14) button on the main unit or remote control once and the current track will be played conti-
nuously
• Repeat All --- Press the REPEAT (14) button again and ALL tracks on the current disc will be played continuously.
• Normal playback --- Press REPEAT (14) button again to resume normal playback.
Note: Pressing the STOP button
will be cleared.

PROGRAM PLAY

Program play must be set when the CD is stopped. You can program up to 20 tracks in any order.
1. Press STOP (7) on the unit or
unit or MEM/CLK SET, PROG (1) button on remote control.
2. Press :/TUN+ (11) or 9/TUN- (8) buttons on main unit or :/TUN+ (9) or 9/TUN- (4) buttons on remote control to select
a track. The display shows P-01 the selected track.
3. Press CLK SET, MEM/PROG (13) button on the main unit or MEM/CLK SET, PROG (1) on remote control to add the track into
the program list. The display shows P-02
4. Repeat steps 2 and 3 until you complete the programming. You can program up to 20 tracks in CD disc or 99 tracks in MP3
disc.
Start the Program Play: Press /PAIR (10) button on main unit or/PAIRING (6) button on remote control.
To Pause or Stop a Program Play: Press /PAIR (10) button on main unit or/PAIRING (6) button on remote control for
PAUSE. Press STOP
To Replay a Program: Press/PAIR (10) button on main unit or/PAIRING (6) button on remote control.
To Review the Content of a Program: Press STOP
SET, MEM/PROG (13) button on the main unit or MEM/CLK SET, PROG (1) on remote control to review the programmed tracks.
To Clear the Program: Press STOP
USB FUNCTION
PLAYBACK
1. Connect to the USB (25) a USB memory device.
2. Power on and press the SOURCE button (5) until the display will show "USb", which indicates the loading of data in the USB
device. In the absence of the USB device, the display will show no.
(11) button on remote control to stop playback.
(7) on the unit or
(11) button on remote control and then press CLK SET, MEM/PROG (13) button on the main
(7) on the unit or (11) button on remote control to STOP the program play.
(7) on the unit or
(7) on the unit or
(11) button on remote control will stop playback and the play mode
(11) button on remote control, then keep pressing the CLK
(11) button on remote control twice or open and close the CD door.
HF 1900 BT
11