Cleaning And Maintenance - Domo DO634K Manual De Instrucciones

USE
· Slide the connection plug into the opening.
· Plug in the appliance. The auto-off indicator light will
illuminate shortly and "8" will appear for a while on the
display.
· Fasten the heating belt at your back with the Velcro.
Make sure the power connection is on the outside of the belt.
· Press the on/off button to switch on the appliance. "1" will appear on the display.
· Then, press the temperature setting button to increase the temperature. The temperature
will increase each time you push the button. If you push the button once again when you
arrive at setting 6, the temperature will drop again to setting 1.
· The appliance will switch off automatically after 1.5 hours. The auto-off indicator light will
illuminate. Let the appliance cool down for 10 minutes before turning it on again.
· Press the on/off button if you want to disconnect the appliance. Then unplug the appliance.
· Attention!
· Prolonged use on a high temperature setting may cause burns on a sensitive skin.
· Check if the temperature is pleasant with the top of your hand. This zone is more sensitive
than the palm of the hand.
· If you use the appliance for several hours at the highest setting, the appliance could
overheat.

CLEANING AND MAINTENANCE

· Let the appliance cool down completely before cleaning it.
· Remove the connection plug.
· The heating belt can then be washed by hand (or in the washing machine) at 30°C max.
Washing too frequently can lead to colour changes or abrasion. So only wash the heating
belt when it is really necessary.
· Hang the heating belt out to dry. Never tumble dry, dry in the sun or on a heater. Do not
use clothes-pegs, but hang the heating belt over a drying rack.
· Never switch the appliance on to dry faster.
· Store the heating belt in a dry place. Make sure the heating belt is rolled up properly. Do
not fold the appliance.
24
DO634K