Automatic Heat Up; Power Function; Power Management - AEG HK634200XB Manual De Instrucciones

Automatic Heat Up

You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the illustration), and then de-
creases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
display.
2. Immediately touch
on in the display.
3. Immediately touch
the necessary heat setting comes on. After 3
seconds
To stop the function touch

Power function

The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
vate, touch

Power management

The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch
cooking zone comes on.
• To activate or change the Timer: touch
minutes). When the indicator of the cooking zone starts to flash slow, the time counts
down.
. The symbol comes on in the
. The symbol
again and again until
comes on in the display.
.
or .
11
10
9
8
7
6
5
4
3
2
comes
1
0
again and again until the indicator of a necessary
or of the timer to set the time (
Operating instructions
1 2 3 4 5 6
, comes on. To deacti-
25
7 8 9
00 99
-