Sony PlayStation 2 Manual De Instrucciones página 9

Network adaptor
Front
LINE NETWORK
Rear
PlayStation 2 console
®
Rear (with network adaptor removed)
Line connector
Network connector
Buzzer port
Mounting screws
Console connector
HDD data connector
HDD power connector
Expansion bus connector
EXPANSION BAY
Positioning the console
You can position the console either horizontally
or vertically.
When positioning the console vertically, use the
SCPH-10040 U vertical stand (for PlayStation
(sold separately). If a vertical stand (for
PlayStation 2) is not available, set the console
®
in the horizontal position as shown below.
When positioning the console horizontally, you
can use the SCPH-10110 U horizontal stand (for
PlayStation 2) (sold separately).
®
Horizontal position Vertical position
Notes
• Do not place the console in any position other than the
horizontal or vertical positions as doing so may damage it.
• Do not change the position of the console while it is in
operation. Doing so may damage the disc or cause the
console to malfunction.
The " " product family logo on the disc
tray
The " " product family logo on the disc tray
2) can be rotated to match the horizontal or
®
vertical positioning of the console.
Logo adjustment
9
US