Assembly & Operation - Force PT113001 Manual De Operador

WARNING!
Always unplug Rotary Tool before
changing accessories, changing
collets or servicing.
WARNING
!
before changing accessories, changing collets
Attachment, collet and collet nut
or servicing.
assembly WARNING
!
Attachment, collet and collet nut assembly
before changing accessories, changing collets
CAUTION!
or servicing.
CAUTION
Always use the collet that matches !
Attachment, collet and collet nut assembly
the shank size of the accessory
matches the shank size of the accessory you
you plan to use. Never force a plan to use. Never force a larger diameter
CAUTION
!
shank into a smaller sized collet.
larger diameter shank into a smaller
matches the shank size of the accessory you
sized collet.
Collet Nut- To loosen the collet nut (A) Fig.2,
plan to use. Never force a larger diameter
press spindle lock button (B) and rotate the
shank into a smaller sized collet.
Collet Nut- To loosen the collet
tool shaft by hand until the lock engages the
nut (A) Fig.2, press spindle lock
shaft preventing further rotation.
Collet Nut- To loosen the collet nut (A) Fig.2,
button (B) and rotate the tool shaft
press spindle lock button (B) and rotate the
by hand until the lock engages the
tool shaft by hand until the lock engages the
WARNING
!
shaft preventing further rotation.
shaft preventing further rotation.
button while the tool is running.
WARNING!
With the spindle lock engaged, use the collet
WARNING
!
Do not engage spindle lock button
nut wrench (C) to loosen it if necessary. The
button while the tool is running.
collet nut must be loosely threaded on when
while the tool is running.
inserting an accessory. Change accessories
With the spindle lock engaged, use the collet
With the spindle lock engaged, use by inserting the new one into the collet (D) as
nut wrench (C) to loosen it if necessary. The
the collet nut wrench (C) to loosen it if
far as possible to minimize runout and unbalance.
collet nut must be loosely threaded on when
necessary. The collet nut must be loosely
With the shaft lock engaged, finger tighten the
inserting an accessory. Change accessories
threaded on when inserting an accessory.
collet nut until the accessory shank is gripped
by inserting the new one into the collet (D) as
Change accessories by inserting the new
by the collet. Avoid excessive tigtening of the
far as possible to minimize runout and unbalance.
one into the collet (D) as far as possible
collet nut when there is not accessory inserted.
With the shaft lock engaged, finger tighten the
to minimize run out and unbalance. With
To install a different collet, remove the collet
collet nut until the accessory shank is gripped
the shaft lock engaged, finger-tighten
nut and the collet already in place. Insert the
by the collet. Avoid excessive tigtening of the
the collet nut until the accessory shank
unslotted end of the collet in the hole at the
collet nut when there is not accessory inserted.
is gripped by the collet. Avoid excessive
end of the tools' shaft. Replace collet nut on
To install a different collet, remove the collet
tightening of the collet nut when there
the shaft and tighten.
nut and the collet already in place. Insert the
is not accessory inserted. To install a
unslotted end of the collet in the hole at the
different collet, remove the collet nut
Attaching the Flex Shaft
end of the tools' shaft. Replace collet nut on
and the collet already in place. Insert the
the shaft and tighten.
unslotted end of the collet in the hole at Unscrew the housing nut (A) Fig.3 and remove
the end of the tools' shaft. Replace collet it. The collet nut (B) and the 1/8" collet (C)
Attaching the Flex Shaft
nut on the shaft and tighten.
must be kept in place. Mount the Flex Shaft by
placing the inner shaft (D) into the tools' chuck,
Unscrew the housing nut (A) Fig.3 and remove
Attaching the Flex Shaft
secure it in place by tightening the collet nut.
it. The collet nut (B) and the 1/8" collet (C)
Then using the Flex Shaft housing nut (E), fix
must be kept in place. Mount the Flex Shaft by
Unscrew the housing nut (A) Fig.3 and
the Flex Shaft to the rotary tool by turning it
placing the inner shaft (D) into the tools' chuck,
remove it. The collet nut (B) and the 1/8"
clockwise.
secure it in place by tightening the collet nut.
collet (C) must be kept in place. Mount
the Flex Shaft by placing the inner shaft Then using the Flex Shaft housing nut (E), fix
(D) into the tools' chuck, secure it in place the Flex Shaft to the rotary tool by turning it
by tightening the collet nut. Then using
clockwise.
8
ASSEMBLY & OPERATION
ASSEMBLY & OPERATION
!
ASSEMBLY & OPERATION
Always unplug Rotary Tool
Always unplug Rotary Tool
Always use the collet which
!
Always use the collet which
Do not engage spindle lock
!
Do not engage spindle lock
the Flex Shaft housing nut (E), fix the
Flex Shaft to the rotary tool by turning it
clockwise.
OPERATION
OPERATION
Operation
OPERATION
Before operating, make sure you have read all
OPERATION
Before operating, make sure you have
previous safety precautions before operating
Operation
read all previous safety precautions
your rotary tool. The real secret to your rotary
before operating your rotary tool. The
tool is its speed. A typical electric drill is a
Before operating, make sure you have read all
real secret to your rotary tool is its speed.
low-speed, high torque tool. The rotary tool is
previous safety precautions before operating
A typical electric drill is a low-speed,
the opposite, it is a high-speed, low torque
your rotary tool. The real secret to your rotary
high torque tool. The rotary tool is the
tool. So please do not apply pressure on the
tool is its speed. A typical electric drill is a
opposite; it is a high-speed, low torque
tool, simply hold it and guide it, the speed will
low-speed, high torque tool. The rotary tool is
tool. So please do not apply pressure on
do the rest.
the opposite, it is a high-speed, low torque
the tool, simply hold it and guide it, the
tool. So please do not apply pressure on the
speed will do the rest.
tool, simply hold it and guide it, the speed will
WARNING
!
Too high a load at a low
do the rest.
WARNING!
speed can burn out the motor！
Too high a load at a low speed
Hold the rotary tool in your hand and plug the
can burn out the motor!
WARNING
!
Too high a load at a low
power cord into the wall outlet. Switch on the
speed can burn out the motor！
rotary tool by pressing the ON/OFF switch (A)
Hold the rotary tool in your hand and
Fig.5. Then a speed setting must be selected
plug the power cord into the wall outlet.
Hold the rotary tool in your hand and plug the
using the variable speed thumb dial (B). The
Switch on the rotary tool by pressing
power cord into the wall outlet. Switch on the
accessory and job to do will determine the
the ON/OFF switch (A) Fig.5. Then a
rotary tool by pressing the ON/OFF switch (A)
speed setting must be selected using
speed setting to use.
Fig.5. Then a speed setting must be selected
the variable speed thumb dial (B). The
using the variable speed thumb dial (B). The
accessory and job to do will determine
accessory and job to do will determine the
the speed setting to use.
speed setting to use.
Fig.5
Fig.5
-9-
-9-
!