JVC KW-R910BT Manual De Instrucciones página 15

MIC LEVEL –20 — +08 (0): The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –05 — –20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
Bluetooth mode operations
1 Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
1 Press the volume knob to select a name or a phone number.
RECENT
• ">" indicates call received, "<" indicates call made, "M" indicates call
CALL
missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, "SEND P.BOOK MANUALLY" appears. Transfer the phonebook
manually. ( 15, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as "Ú" is
showns as "U".)
• If the phonebook contains many contacts, ( 14, Select a contact by
name).
Default: XX
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
DIAL NUMBER
2 Press S / T to move the entry position.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( 14, Use Voice Recognition)
SETTINGS
AUTO 01 SEC — 30 SEC: The unit answer incoming call automatically in the
ANSWER selected time (seconds). ; OFF: Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming
IN PHONE: The unit uses the connected phones' ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
RING COLOR COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to
the selected color during a call or when a text message comes in. ;
OFF : Cancels.
MSG NOTICE* ON: The unit rings and "RCV MESSAGE" appears to notify you of an
incoming text message. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
Text message notification
When the phone receives a text message, the unit rings and "RCV
MESSAGE" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
1 2
Repeat steps and until you finish entering the phone number.
text messages.
BLUETOOTH®
Default: XX
ENGLISH | 13