Display Settings - JVC KW-R910BT Manual De Instrucciones

DISPLAY SETTINGS

1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
AUTO: Changes between the day and night adjustments when you turn off or
on the car headlights. *
day adjustments.
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level (00 to 31).
(Default: DAY: 31 ; NIGHT: 15)
SCROLL * 2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
* 1
The illumination control wire connection is required. ( 25)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
18
1
; ON: Selects the night adjustments. ; OFF: Selects the
COLOR
PRESET You can select a color for [ALL ZONE], [ZONE 1], [DISP ZONE], or
[ZONE 2] separately. For [ALL ZONE], you can also select a color
pattern.
Default color:
ALL ZONE: [COLOR 06], ZONE 1: [COLOR 06],
DISP ZONE: [COLOR 01], ZONE 2: [COLOR 27]
1 Select a zone for setting. ( Illustration on the left column)
2 Select a color for the selected zone.
Default: XX
* If one of these color pattern is selected, the [ZONE 1], [DISP ZONE],
DAY COLOR Store your own day and night colors for different zone.
1 Select a zone for setting. ( Illustration on the left column)
2 RED / GREEN / BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing
COLOR GUIDE ON: Changes the button, display and USB input terminal illumination
when settings are performed on menu and list search. Display zone
will automatically change depending on volume level. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's
headlight.
• COLOR 01 to COLOR 29
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW 01 to COLOR FLOW 03: Color changes at
different speeds.
• SPECTRUM/ GROOVE/ TECHNO/ EMOTION/ RELAX/
NIGHT SWEEP: The selected color pattern is shown.*
(Selectable only when [ALL ZONE] is selected in step
[ZONE 2] illumination color will change to the default color.
appears on the display.
Default: XX
1
.)