Maintenance And Care - Stanley ST-310A-120 Manual De Instrucciones

ENGLISH

MAINTENANCE AND CARE

• Before you clean or service your blower fan, be sure to
unplug it. Clean your blower fan using a soft moistened
cloth with a mild soap solution. Never immerse any
electrical parts partially or fully in water. Do not use
gasoline, benzene, thinner, harsh cleaners, etc. as
cleaning agents. When not in use, store blower fan in a
clean, dry area.
• Motor is permanently lubricated.
OPERATION
• Plug the blower fan into a properly grounded three-
pronged 120V AC receptacle. Using the knob on the side of
the blower fan, select the desired operating speed.
• You can adjust the blower fan's vertical angle. Do this by
moving the blower fan body forward or backward until
desired setting is met. A clicking sound emitting from the
fan while adjusting the angle is normal.
Breaker Reset:
• A 10-amp breaker is provided as a safety feature of your
blower fan. If a tool or accessory that has more amperage
than allowed is used, the breaker will trip and need to
reset. You can reset by unplugging the appliance or
accessory causing the breaker to trip and push the reset
button on the blower fan. This button is adjacent to the
fan's outlets.
!
To reduce the risk of fire or electric shock, do not use this
fan with any solid-state speed control device.
4
Blower Fan Instruction Manual (ST-310A-120)