Accessing The Sd Card From Your Computer - Korg Kaossilator Pro + Manual De Usuario

Accessing the SD card from your computer

The KAOSSILATOR PRO+ has a USB connec-
tor that can be connected to your computer, al-
lowing you to copy settings or loop recorder
data from the SD card to your computer for sav-
ing (backup).
If you press the SHIFT button while in USB mode, you'll return to
the program display. Never press the SHIFT button while communica-
tion is taking place. Doing so may render the SD card unusable.
Connecting the USB connector
If you connect the KAOSSILATOR PRO+'s
USB connector directly to your computer, you'll
be able to use your computer to manage the
data on the card that's in the KAOSSILATOR
PRO+'s card slot.
Follow the procedure for the operating system
on your computer.
Windows users
TIP Before you continue, power-on your computer
and start up the operating system.
1. Use a USB cable to connect the KAOSSIL-
ATOR PRO+ to your computer.
Plug the connector of the USB cable that is
connected to your computer into the KAOSSI-
LATOR PRO+'s USB connector.
Make sure that the connector is oriented cor-
rectly, and insert it as far as it will go.
TIP: When you connect the KAOSSILATOR PRO+ for
the first time, the standard Windows device driver will
be installed automatically.
2. The drive name of the card in the card slot
will appear on your computer.
3. Hold down the SHIFT button and press the
PROGRAM MEMORY 7 (USB) button. The dis-
play will indicate "rdy."
TIP The contents of the KAOSSILATOR PRO+'s card
won't be visible from your computer until you enter
"USB Storage Mode."
From this point until you've completed step 5, you must not dis-
connect the USB cable, remove the card from the slot, or switch the
power of your computer on or off. Doing so may damage the data.
4. To view the contents of the KAOSSILATOR
PRO+'s card, open the drive that was added to
your computer in step 2.
Copy the desired data onto your computer. You
can also copy data from your computer onto
the card.
5. Exit USB mode.
In Explorer or My Computer, right-click the "Re-
movable Disk" icon and choose "Remove."
Then press the KAOSSILATOR PRO+'s SHIFT
button to exit USB mode.
When you're ready to disconnect the KAOSSILATOR PRO+ from
your computer, you must first exit USB mode and then disconnect the
USB cable.
MacOSX users (OSX 10.5 or later)
1. Use a USB cable to connect the KAOSSIL-
ATOR PRO+ to your computer.
Plug the USB connector into the KAOSSILA-
TOR PRO+'s USB connector. Make sure that
the connector is oriented correctly, and insert it
as far as it will go.
2. Hold down the SHIFT button and press the
PROGRAM MEMORY 7 (USB) button.
The display will indicate "buSy."
3. The drive name of the card in the card slot
will appear on your computer.
While this screen is shown, you must not disconnect the USB ca-
ble, remove the card from the slot, or switch the power of your com-
puter on or off. Doing so may damage the data.
4. To view the contents of the KAOSSILATOR
PRO+'s card, open the drive that was added to
your computer in step 2.
Copy the desired data onto your computer. You
can also copy data from your computer onto
the card.
5. When you're ready to disconnect the KA-
OSSILATOR PRO+, drag the drive from the
desktop into the Trash.
Then press the KAOSSILATOR PRO+'s SHIFT
button to exit USB mode.
When you're ready to disconnect the KAOSSILATOR PRO+ from
your computer, you must first exit USB mode and then disconnect the
USB cable.
19