Installation Using The Screw Holes On The Side Of The Navigation Unit - Pioneer AVIC-F50BT Instrucciones Para La Instalación, Uso Y Mantenimiento

Installation
Installation using the screw holes
on the side of the navigation unit
% Fastening the navigation unit to the
factory radio-mounting bracket.
Position the navigation unit so that its screw
holes are aligned with the screw holes of the
bracket, and tighten the screws at three loca-
tions on each side.
If the pawl interferes with installation,
you may bend it down out of the way.
Factory radio-mounting bracket
Truss head screw or
flush surface screw
Be sure to use the
screws supplied
with this navigation
system.
Dashboard or console
Section
03
23
Engb