Control
Standby
ON/OFF
Airflow control
Oscillation
ON/OFF
Attach the remote control to the
top of the machine with the buttons
facing down.
Airflow
6
Auto mode
Sleep timer
Night mode
To operate, point the
remote control toward
the front of the base.
Select a high flow of air.
Select a low flow of air.
Display icons
Flashing green = Wi-Fi is ready to connect
to your Dyson Link app
Flashing white = Wi-Fi connecting
Solid white = Wi-Fi connected
Off = Wi-Fi disabled
Solid white = cleaning/below air quality target
Solid green = clean/air quality target has been met
Off = machine is not in auto cleaning mode
Solid white = machine is in night mode
Off = appliance is not in night mode
Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the machine will go
into standby mode. To cancel, reduce the time
until two dashes appear.