Remote Control; Display Icons; Sleep Timer - Dyson pure coollink Manual De Instrucciones

Remote control

Standby
ON/OFF
Airflow control
Oscillation
ON/OFF
Attach the remote control to the
top of the machine with the buttons
facing down.
Airflow
6
Auto mode

Sleep timer

Night mode
To operate, point the
remote control toward
the front of the base.
Select a high flow of air.
Select a low flow of air.

Display icons

Flashing green = Wi-Fi is ready to connect
to your Dyson Link app
Flashing white = Wi-Fi connecting
Solid white = Wi-Fi connected
Off = Wi-Fi disabled
Solid white = clean/air quality target has not been
met
Solid green = clean/air quality target has been met
Off = machine is not in auto cleaning mode
Solid white = machine is in night mode
Off = machine is not in night mode
Sleep timer
To set the sleep timer, press and hold the timer
button to select the desired time. When time reaches
zero, the machine will go into standby mode. To
cancel, reduce the time until two dashes appear.