Night Mode - Dyson Pure Cool Link Manual De Instrucciones

Night mode

The night mode will dim the display and run quietly, making it ideal for use while sleeping.
When night mode is enabled (indicated by an
illuminated half moon symbol in the top right
corner of the display), the display will dim
and after 5 seconds will fade to off. The half
moon symbol remains illuminated.
If in manual mode, the power will reduce to level 4. When night mode is activated, if it is already below level 4, it will remain the same.
This can be manually changed if desired. The display will illuminate briefly, then fade as before.
If in Auto mode the power will be reduced automatically.
Auto mode
Auto mode adjusts the power according to the air quality in the room.
Poor air quality
When Auto mode is enabled (indicated by an A symbol in the bottom left corner of
the display), the on-board sensors will intelligently adjust the speed of the machine
according to the air quality.
For additional control the Dyson Link app can be used to further adjust the sensitivity of the machine.
A period of 6 days is required after the machine is first used for the sensor to calibrate. During this period the machine
may be more sensitive to VOCs than normal.
Setting up Dyson Link app
The machine can be enhanced when connected to the Dyson Link app on your smart device.
Download the Dyson Link app,
available on iOS and Android.
Air quality improving
Select 'Add a Product' from within the app
and follow the on screen instructions.
5 secs
Air quality target has been met.
If the air is clean the A symbol will turn green
and the numerical display will switch off. If
the air quality worsens the A symbol will turn
white and the machine will automatically
restart cleaning the room.
Product SSID
XXXXX-XXX-XX-XXXXXXXX-XXXX
Product Wi-Fi Password
XXXXXXXX
Mac address
X X:X X:X X:X X:X X:X X
In order to connect the machine,
you will need the information on
the front of this manual.
7