Sleep Timer; Night Mode; Looking After Your Machine - Dyson Pure Hot+Cool Cryptomic Manual De Instrucciones

Sleep timer

Your Dyson purifying fan heater
will turn off automatically after the
selected amount of time.
To set the time: press the button
to scroll through the time options.
Once activated, press the Sleep
timer button once to see the
time selected.
To cancel the Sleep timer: press
the Sleep timer button twice.

Looking after your machine

To always get the best performance from your Dyson purifying fan heater,
it's important to regularly clean it and check for blockages.
CLEANING
If dust accumulates on the surface of your machine, wipe dust from the loop
amplifier, filter unit and other parts with a dry or damp cloth.
Look for blockages in the air inlet holes on the filter and the small aperture
inside the loop amplifier.
Use a soft brush to remove dust and debris.
Don't use detergents or polishes to clean your machine.
CHANGING YOUR FILTERS
The Dyson Link app and LCD screen on your machine will indicate when to
change your filters.
Order new filters from the Dyson Link app or visit www.dyson.com. Your new
filters will come with instructions or go online for further support and videos.
Don't use your Dyson purifying fan heater without the filters in place.
Unplug your machine from the mains electricity supply before cleaning or
changing filters.
ERROR CODES
If your machine shows an error code, try turning it off and then on again.
If this doesn't clear the error code, contact Dyson.
For further information and support about the care and maintenance of
your machine and replacing the filters, go to the Dyson Link app or visit our
website at www.dyson.com
10

Night mode

In Night mode, your Dyson
purifying fan heater will continue
to monitor and respond to
changes in air quality and
temperature, but only using its
quietest settings – and with its
LCD screen dimmed.