Led Panel; Audible Alarm - INFOSEC UPS SYSTEM E4 VALUE 1000 IEC Manual De Usuario

ON/Mute + Select
Button

3-2. LED Panel

Indicators
Fault information
Load and Battery information
Mode operation information

3-3. Audible Alarm

Battery Mode
Low Battery
Overload
Fault
Bypass Mode
INFOSEC UPS SYSTEM – 15 rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 05 16 AA 59 204 10
 Down key: Press this button to display next selection in the UPS
setting mode.
 Switch to bypass mode: When the main power is normal, press
ON/Mute and Select buttons simultaneously for 5 seconds. Then the
UPS will enter bypass mode. This action will be ineffective when the
input voltage is out of the acceptable range.
Function
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and the codes are
listed in details in 3-6 and 3-8 sections.
Indicates the load level or battery level.
It indicates battery level by 0-25%, 26-50%, 51-75%
and 76-100% when UPS is in battery or standby mode.
It indicates load level by 0-25%, 26-50%, 51-75% and
76-100% when UPS is in online, bypass, ECO and
converter mode.
Indicates overload.
Indicates low battery level and low battery voltage.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the Inverter circuit is working.
Sounds twice every second
Sounds every 4 seconds
Sounds every second
Sounds continuously
Sounds every 10 seconds
28