Operating Mode Description - INFOSEC UPS SYSTEM E4 VALUE 1000 IEC Manual De Usuario

clicking each "Apply" button.
Note: for the voltage range for ECO mode, set acceptable voltage range for ECO mode.

3-5. Operating Mode Description

Operating mode Description
When the input voltage is within the
acceptable range, the UPS will provide
pure and stable AC power to output. The
Online mode
UPS will also charge the battery in
online mode.
Or
When input frequency is within 40 Hz to
Frequency
70 Hz, the UPS can be set at a constant
Converter Mode
output frequency, 50 Hz or 60 Hz. The
UPS will still charge the battery in this
mode.
Energy saving mode:
When the input voltage is within voltage
ECO mode
regulation range, the UPS will bypass
voltage to output for energy saving.
When the input voltage is beyond the
acceptable range or there is a power
Battery mode failure and the alarm sounds every 4
seconds, the UPS will backup power
from battery.
When input voltage is within the
acceptable range but UPS is in
overload, the UPS will enter bypass
Bypass mode
mode or bypass mode can be set on the
front panel. The alarm sounds every 10
seconds.
The UPS is shut down and there is no
Standby mode output supply power, but the batteries
may still be charged.
INFOSEC UPS SYSTEM – 15 rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 05 16 AA 59 204 10
LCD display
30