Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
1.
USB – This USB connection sends and receives control information to/from a connected computer.
2.
CHANNEL TREBLE – Adjusts the high (treble) frequencies of the corresponding channel.
3.
CHANNEL MID – Adjusts the mid-range frequencies of the corresponding channel.
4.
CHANNEL BASS – Adjusts the low (bass) frequencies of the corresponding channel.
5.
CUE – Sends pre-fader audio to the Cue Channel for headphone monitoring.
6.
CUE GAIN – Adjusts the audio level of the Cue channel.
7.
CUE MIX – Turn to mix between Cue and Program in the Headphone channel. When all the way to the
left, only channels routed to CUE will be heard. When all the way right, only the Program mix will be
heard.
8.
BROWSE KNOB – Turn this knob to scroll through lists of tracks and directories in the software. When
a directory is selected, press the knob to enter it. (Press BACK to move up to the previous level.) If a
directory is currently selected, the FOLDER LED will illuminate. If a track is currently selected, the FILE
LED will illuminate.
9.
BACK – This button will take you back to the previous level (folder).
10.
LOAD A / LOAD B – Press one of these buttons while a track is selected to assign it to Deck A or Deck
B, respectively.
11.
CHANNEL FADER – Adjusts the audio level on the corresponding channel.
12.
MASTER FADER – Adjusts the output volume of the Program mix.
13.
CROSSFADER – Blends audio playing between Decks A and B. Sliding this to the left plays Deck A
and sliding to the right plays Deck B.
14.
JOG WHEEL – When the deck is playing, the JOG WHEEL will bend the track's pitch. When the
SCRATCH button is on, the JOG WHEEL will scratch the selected track. When the deck is not playing,
rotating the JOG WHEEL will scan through the track.
15.
SCRATCH – Turns Scratch Mode on or off. If Scratch Mode is on, the button will light up and the JOG
WHEEL will scratch like a turntable when you spin it. The LED will light up to indicate Scratch Mode is
on.
16.
PLAY / PAUSE – Starts or resumes playback if the Deck is paused. Pauses playback if the Deck is
playing.
17.
STUTTER – Press this button while the music is playing to jump back to the last set cue point, creating
a "stutter" effect.
2
6
2
3
3
7
4
4
8
5
5
2
1
Publicidad
Tabla de contenido
