Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ES
FR
ENG
Keep the adjustment close to the balance. Daily control of the weighing exactness is recommended for
quality-relevant applications.
3 . 4 . o p e r at i o n u s i n g a r e C H a r g e a b l e b at t e r y ( o p t i o n a l )
Lift-off
the battery cover on the lower side of the balance. Connect the battery and then cover the
battery door.
For battery operation the balance has an automatic switch-off function which can be activated or
deactivated in the menu.
Procedures as follows:
>
Turn on balance using the
>
Press and hold the
UNIT/COUNT
>
Press the
>
Confirm by pressing the
Use the
UNIT/COUNT
key and
AF on
1.[
]
To save battery power, the balance switches off automatically if 3 minutes without weighing.
AF off
2.[
] Switch-off function deactivated.
Use the
SET/TARER
key to confirm selected setting. The balance returns to weighing mode.
If the batteries are exhausted,
immediately.
If the balance is not used for a longer time, take out the batteries and store them separately. Leaking
battery liquid could damage the balance.
If there exists an optional rechargeable battery, it has to be connected in the battery compartment via a
separate plug-in socket. The mains adapter delivered with the rechargeable battery must be used.
3 . 5 . U S I N G A D A P T O R
>
Before using the external mains adaptor, make sure that the printed voltage must comply with the
local voltage.
>
Only use original mains adaptor. The use of other adaptor is subject to approval by Giropès.
3 . 6 . C O N N E C T I O N O F P E R I P H E R A L D E v I C E S
Before connecting or disconnecting of additional devices (printer, PC) to the data interface, always
disconnect the balance from the power supply.
With your balance, only use accessories and peripheral devices by Giropès, as they are ideally tuned to
your balance.
24
ON/OFF
key and wait for the zero display.
UNIT
FUNCTION
key until [
HOLD/PRINT
key or
SET/TARE
key.
HOLD/PRINT
key to choose between the following settings:
LO
appears in the display. Press
Multi-functional balances
] appears on the display.
AF
key repeatedly until [
ON/OFF
ANF-AND-ANG
] appears.
key and replace the batteries
User's guide
Publicidad
Tabla de contenido
