Installing Batteries - One for All URC6131N Manual De Instrucciones

INSTALLING BATTERIES

1. On the remote control back, press on
the battery door to release it, then lift
off the battery door.
2. Obtain two (2) new AAA alkaline
the battery case, then insert the new
batteries.
Owner's Manual
Battery Precautions:
batteries.
batteries promptly and recycle or dispose
of them in accordance with Local and
National Regulations.
3. Press the battery cover back into
place.
4. Test the remote control by pressing
any mode key (e.g., TV). If the
batteries are inserted correctly, the
POWER key) will blink once.
NOTE: When batteries need replacement,
the remote control will stop operating.
Remove the old batteries and insert
new ones within 10 minutes to ensure
all of your programming information is
restored.
5