Bowers & Wilkins Z2 Manual De Instrucciones página 8

6. Z2 Firmware Update
Updated Z2 firmware may from time to time be made
available for download from Z2's support section of
the Bowers & Wilkins website.
7. Z2 Factory Reset
Z2 has a pin-hole reset button located on its rear
connection panel. The reset button is illustrated in
Diagram 6. To return the Z2 network settings (AirPlay
input) to the factory defaults, ensure the power cable
is connected, and power the Z2 on. Press and hold
the reset button for 2 seconds. The indicator will
flash red twice.
8. Cleaning Z2
Use a lint-free cloth to clean the Z2. If you wish to
use a cleaning agent, apply it onto the cleaning
cloth, not directly onto the Z2. Test a small area first,
as some cleaning products may damage some of
the surfaces. Avoid products that are abrasive, or
contain acid, alkali or anti-bacterial agents.
9. Troubleshooting
If you need help troubleshooting a specific problem,
or have a question you'd like answered, please
consult our Troubleshooting guide, or Frequently
Asked Questions section on the Z2 Product
Support page of our website.
www.bowers-wilkins.com
Z 2
B&W Group Ltd. Worthing England
Designed in the UK Made in China
RESET
Diagram 6
Z2 factory reset
8