Reverse Caution Mode; Driving The Tractor - Cub Cadet XT1 Series Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Reverse Caution Mode

The REVERSE CAUTION MODE
module allows the tractor to be operated in reverse with the
blades (PTO) engaged.
NOTE: Mowing in reverse is not recommended.
WARNING!
the tractor in the REVERSE CAUTION MODE
Always look down and behind before and while
backing. Do not operate the tractor when children
or others are around. Stop the tractor immediately if
someone enters the area.
To use the REVERSE CAUTION MODE
NOTE: The operator MUST be seated in the tractor seat.
1.
Start the engine as previously instructed on the previous
page.
2.
Turn the key from the NORMAL MOWING
position to the REVERSE CAUTION MODE
position of the ignition module. See Figure 5-1.
Indicator
Light
Reverse
Caution
Mode
Position
Stop
position
3.
Press the REVERSE PUSH BUTTON
corner of the ignition module. The red indicator light at
the top, left corner of the ignition module will be ON while
activated. See Figure 5-1.
4.
Once activated (indicator light ON), the tractor can be
driven in reverse with the cutting blades (PTO) engaged.
5.
Always look down and behind before and while backing to
make sure no children are around. After resuming forward
motion, return key to the NORMAL MOWING
The REVERSE CAUTION MODE
a.
The key is placed in either the NORMAL MOWING
position or STOP
b.
The operator leaves the seat.
18
S
5— o
ection
peration
position of the ignition
Use extreme caution while operating
:
(Green)
(Yellow)
Reverse
Push
Button
Start
position
Figure 5-1
at the top, right
will remain activated until:
position or

Driving The Tractor

WARNING!
and sudden stops.
1.
Lightly press the brake pedal to release the parking brake.
Move the throttle into the FAST
2.
To travel FORWARD, slowly press the forward drive pedal
.
forward until the desired speed is achieved. See Figure 5-2.
Forward
Reverse
Normal
3.
To travel in REVERSE, check that the area behind is clear then
Driving
slowly depress the reverse drive pedal until the desired speed
Mode
is achieved. See Figure 5-2.
CAUTION:
direction of travel when the tractor is in motion.
Always bring the tractor to a complete stop before
changing from forward to reverse or vice versa.
WARNING!
without first placing the PTO in the DISENGAGED
(OFF) position and engaging the parking brake. If
leaving the tractor unattended, also turn the engine
off and remove the ignition key.
position.
Avoid sudden starts, excessive speed
position.
Figure 5-2
Do NOT attempt to change the
Do not leave the seat of the tractor

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xt2 seriesEnduro xt1 serieEnduro xt2 serie

Tabla de contenido