Instructions for operation
Cleaning the Ecojet suction nozzle
The suction nozzle features a special internal
device which prevents it from trapping hair and
other residue.
This device should be checked regularly in order
to ensure complete effi ciency.
Using a cross-head screwdriver, remove the
screw and remove the fi lter plate from the
nozzle.
Remove any residue by washing the parts with
water and a little bleach.
Press the internal plate gently with a fi nger
and check that it moves inwards by about 8
- 9 mm.
Replace the fi lter plate and the screw.
3
Special maintenance
To keep the surface shine even after years of
use, apply a good-quality spray or wax polish
and rub with a soft cloth.
Light surface scratches or cigarette burns can
be removed using the special maintenance kit,
which is available from authorized dealers and
Service Centres.
i n
d i
If the damage to the surface is more serious, or if
damaged components require replacement, it is
necessary to contact a specialized technician.
The manufacturer recommends that users
contact the nearest authorized service centre
for all maintenance operations.
4
ALBATROS WHIRLPOOL
Idropool, Digit and Digit Professional
Whirlpool nozzles
The Whirlpool nozzles are carefully positioned to
provide a hydromassage from the outer parts of
the body towards the heart. The nozzles can be
oriented in all directions at the touch of a fi nger.
Turn the nozzle clockwise to increase the intensity
of the air/water mixture, or counter-clockwise to
reduce or, if preferred, close the nozzle entirely.
This means that you can enjoy a delicate or
vigorous massage according to taste.
The controls on the edge of the tub may be of two
types: Idropool (pneumatic) or Digit (digital).
IDROPOOL control system
The controls for the pneumatic control system
(Idropool) are described below:
A
ʼ
-A: Adjusts the quantity of air
P:
Uso Vasche IDROP / DIGIT - Code 10004904 - Edition 3 - 09/2007
Starts and stops the hydromassage
system. If the appliance has just been
switched on, wait a few seconds before
starting the hydromassage system.
L:
L
A'
P
A
A'
A
L
P
RC
RF
Versions with tap units
RC: Hot water tap
RF: Cold water tap
15'
Timer
The tub also features a timer which automatically
stops the hydromassage cycle after 15 minutes.
This time cannot be modifi ed. To restart the cycle,
simply press P.
Digit and Digit Professional control
systems
For tubs with digital controls, the control panel
is as shown below:
LED "P"
Led - D
Led - Dis
LED "D"
Led - Liv
LED "A"
LED "Liv" This dual-function LED lights red
Led - P
Led - A
P
D
A
Key "P"
Key "D"
Key "A"
a
a) Air supply to all nozzles closed:
b
b) Air supply to all nozzles in the foot area
2
This LED lights when the appliance is
connected to the power supply.
When the tub is switched on and while
the hydromassage system is in operation,
this LED lights yellow. If the level of
water is insuffi cient for operation of the
hydromassage system, this LED lights
red.
When the correct level is reached, it turns
green.
This LED lights (red) when the
hydromassage system is in
operation.
This LED lights (red) while the
disinfection cycle is in operation.
This LED lights (red) when the air
valve is in operation.
to indicate that the level of water in
the tub is not suffi cient to allow the
hydromassage system to operate;
when the water reaches a suffi cient
level, and for the entire duration of
the cycle, this LED lights green.
Starts and stops the hydromassage
system. If the appliance has just been
switched on, wait a few seconds
before starting the hydromassage
system.
Starts the disinfection cycle (key with
safety feature).
The function is started by pressing
this key twice within a period of 5
seconds, during which LED "Dis"
fl ashes. This LED remains lit (red)
during the entire disinfection cycle,
which has a duration of approximately
2 minutes.
Remember that, once started,
the disinfection cycle cannot be
interrupted.
Starts and stops the electric air
valve.
This valve opens and closes the air
supply through the nozzles, offering
various possibilities:
Gentle massage effect: relieves tiredness
prior to a lymph drainage treatment.
open:
Massages the feet and legs: stimulates the
English