Limited Warranty; Service Policy; Emc Guidelines And Manufacturer Declaration - WelchAllyn ABPM 7100 Instrucciones De Uso

31 - Limited Warranty

Limited Warranty
Welch Allyn warrants the product to be free of defects in material and workmanship and to perform in accordance
with manufacturer's specifications for the period of one year from the date of purchase from Welch Allyn or its
authorized distributors or agents.
The warranty period shall start on the date of purchase. The date of purchase is: 1) the invoiced ship date if the
device was purchased directly from Welch Allyn, 2) the date specified during product registration, 3) the date of
purchase of the product from a Welch Allyn authorized distributor as documented from a receipt from said
distributor.
This warranty does not cover damage caused by: 1) handling during shipping, 2) use or maintenance contrary
to labeled instructions, 3) alteration or repair by anyone not authorized by Welch Allyn, and 4) accidents.
The product warranty is also subject to the following terms and limitations: Accessories are not covered by the
warranty. Refer to the directions for use provided with individual accessories for warranty information.
Shipping cost to return a device to a Welch Allyn Service center is not included.
A service notification number must be obtained from Welch Allyn prior to returning any products or accessories
to Welch Allyn's designated service centers for repair. To obtain a service notification number, contact Welch
Allyn Technical Support.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILTY AND FITNESS FOR A
PARTICULAR PURPOSE. WELCH ALLYN'S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO
REPAIR OR REPLACEMENT OF PRODUCTS CONTAINING A DEFECT. WELCH ALLYN IS NOT
RESPONSIBLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM A PRODUCT
DEFECT COVERED BY THE WARRANTY.

Service Policy

All repairs on products under warranty must be performed by Welch Allyn or by a service provider authorized
by Welch Allyn. Unauthorized repairs will void the warranty. In addition, whether or not covered under warranty,
any product repair should be performed exclusively by Welch Allyn or by a service provider that has been
authorized by Welch Allyn.
If the product fails to function properly - or if you need assistance, service, or spare parts - contact the nearest
Welch Allyn Technical Support Center.
Before contacting Welch Allyn, try to duplicate the problem, and check all accessories to ensure that they are
not causing the problem. When calling, please be prepared to provide:
• Product name, model number, and serial number of your product.
• Complete description of the problem.
• Complete name, address and phone number of your facility.
• For out-of-warranty repairs or spare parts orders, a purchase order (or credit card) number.
• For parts orders, the required spare or replacement part numbers.
If your product requires warranty, extended warranty, or non-warranty repair service, please call first the
nearest Welch Allyn Technical Support Center. A representative will assist you troubleshooting the problem
and will make every effort to solve it over the phone, avoiding potential unnecessary return of your product.
In case a return cannot be avoided, the representative will record all necessary information and will provide a
Return Material Authorization (RMA) number, as well as the appropriate return address. An RMA number must
be obtained prior to any return.
If you have to return your product for service, follow these recommended packing instructions:
• Remove all hoses, cables, sensors, power cords, and other accessories (as appropriate) before
packing, unless you suspect they are associated with the problem.
• Wherever possible use the original shipping carton and packing materials.
• Include a packing list and the Welch Allyn Return Material Authorization (RMA) number.
It is recommended that all returned goods be insured. Claims for loss or damage to the product must be
initiated by the sender.
Pos: 20 /Sammel/08_Anhang @ 0\m od_1400228500241_6.docx @ 4869 @ 123333 @ 1

EMC Guidelines and Manufacturer Declaration

Table 1 – Guidelines and Manufacturer Declaration
Electromagnetic emission for all ME devices and ME systems
Guidelines and Manufacturer Declaration - Electromagnetic emissions
The ABPM 7100 is intended for operation in an electromagnetic environment as specified below. The
customer or user of the ABPM 7100 should ensure it is used in such an environment.
Emission measurement Compliance
RF Emissions according to CISPR 11 Group 1
RF Emissions according to CISPR 11 Class B
RF Emissions according to CISPR 25 Not applicable
Not applicable
Emission of harmonics
according to IEC 61000-3-2
Emission of voltage fluctuations/ Not applicable
flickers according to IEC 61000-3-3
EMC Guidelines and Manufacturer Declaration - 32
Electromagnetic Environment Guideline
The ABPM 7100 utilizes RF power for its
internal function only. Its RF emission is
therefore very low and it is improbable that
neighbouring electronic device experience any
interference.
The ABPM 7100 is suitable for use in other
facilities than the living area and those
immediately connected to the public supply
network, which also supplies buildings used for
residential purposes.