Lorex Baby BB1811AC1 Guia De Inicio Rapido

ADD-ON CAMERA
BB1811AC1
QUICK START GUIDE
What's Included
x1 x2
Getting Started
Connect the power adapter to the
1
camera and then to a power outlet.
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Pairing the Camera with Your Monitor
Place the camera and monitor next to each other. Make sure the
1
monitor and the camera are turned on.
2 Press on the monitor to open the on-screen menu.
Use the arrow keys on the monitor (
3
following display can be seen then press
Use the arrow keys on the monitor (
4
you would like to pair the camera to.
NOTE: If a camera is already connected to the channel you
selected, the new camera will replace the existing camera.
www.lorexbaby.com
1-20022013
x1 x2 x2
NOTE: This camera is wall mountable.
Please see the User's Guide provided with
BB1811 for details.
Use the included cable clips to help keep
2 Slide the power switch to ON. TIP
power cords out of reach of your child.
Press the button on the monitor to begin pairing.
5
The LINK LED will start flashing.
6 Press the PAIR button on the back of the camera.
) until the
.
PAIR button
Images from the camera are immediately shown on the
monitor once the camera is successfully paired.
NOTE: Immediately move the camera away from the monitor
to avoid speaker feedback.
) to select the channel
7
Press twice to exit menu.
NOTE:
If pairing was unsuccessful, repeat the pairing process
described above starting with step 2.
BB1811AC1_Quick Start Guide_R1
Cable clips
Page 1