Lorex Baby LB2221AC1B Guia De Inicio Rapido

ADD-ON CAMERA
LB2221AC1B
QUICK START GUIDE
What's Included
x1 x2
Getting Started
Connect the power adapter to the camera and
1
then to a power outlet.
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Pairing the Camera with Your Monitor
Place the camera and both monitors within 1ft of each other.
1
Make sure the camera and the monitors are turned on.
2
Press to open
the main menu
3 Tap
Tap / to select the channel you wish to pair the camera to.
4
NOTE: If a camera is already connected to this channel,
the new camera will replace the existing camera.
5 Tap
NOTE: The number shown in the icon will vary depending
on the pairing channel.
www.lorexbaby.com
1-20022013
x2 x2
x1
NOTE: This camera is wall mountable.
Please see the User's Guide provided
with LB221PK29 for details.
Use the included cable clips to help keep
Press the power button
2 TIP
power cables away from your child.
to turn on the camera.
Feed the power cable through the two plastic
brackets on each cable clip. Position the clip
against a wall or floor.
Remove the adhesive guard
when you are prepared to
install the clip.
Wrap excess cable around
the brackets.
6
Live video from the camera is displayed on the
monitor.
NOTE:
Immediately move the camera away from the
monitor to avoid speaker feedback.
OPTIONAL. Repeat steps 2-6 to pair the camera to
7
a second monitor.
NOTE:
If pairing was unsuccessful, repeat steps 2 to 6
of the pairing process.
LB2221AC1B_QSG_TRILINGUAL_R1
Press and hold the
power button on
the camera you are
pairing for 3 seconds.
Page 1