Exo Terra LIGHT DOME PT2055 Manual De Instrucciones página 3

10. Do not operate any appliance if it has a damaged cord or plug,
or if it is malfunctioning or if it is dropped or damaged in any
manner. If the power cord of this appliance is damaged it should
be retuned to the manufacturer or authorized service agent for
replacement, there may be a small charge for this service.
11. Make sure the appliance is securely installed before operating it.
12. CAUTION: Allow fixture to cool for 15 min. before RE-lamping,
cleaning or repositioning the fixture.
SAVE THESE INSTRUCTIONS.
Instructions:
Clamp Installation (hanger portion not required):
Note: This clamp must not be used to mount this lamp onto any
glass item, terrarium, shelf, or aquarium.Attach Dome Light ONLY on
the frame of the terrarium, not on the glass.
1. Screw light bulb into the Exo
Terra Light Dome (follow
maximum wattage guidelines).
TIP: apply a thin layer of
petroleum jelly to the threads on
the base of the light bulb before
screwing it in. This will make
it easier to unscrew the bulb
when it is time to replace it.
2. Attach the clamp bracket to
4 the lamp socket, wide part
of the bracket goes around
the socket (adjust the screw
to widen the bracket as
necessary) (A).
3. Insert the narrow, rounded end
of the clamp between narrow
part of the bracket and tighten
the screw until the clamp is firmly
secured (B).
4. Attach the lamp to the top rim portion of your terrarium (not to
the glass part of the terrarium). Note: squeeze the clamp to open
it, release the clamp to close it. Test that the Light Dome is firmly
secured to the terrarium by gently tapping the lamp with your
fingers. Ensure that the lamp is positioned over the top metal
screen portion of your terrarium and NOT over any glass, plastic
A
B
parts, or other flammable material. Failure to do so could result
in a possible fire hazard.
5. Keep unit out of reach of children. Keep unit away from curtains
or other flammable objects.
Hanging Installation (clamp portion not required):
1. Screw light bulb into the Exo Terra Light Dome (follow maximum
wattage guidelines). TIP: apply a thin layer of petroleum jelly to
the threads on the base of the light bulb before screwing it in.
This will make it easier to unscrew the bulb when it is time to
replace it.
2. Insert Hanger into the mounting brackets located on either side
of the lamp socket (C).
3. Suspend Exo Terra Light Dome from ceiling or other elevated
platform using a chain or other recommended suspension
method. Ensure that the lamp is positioned over the top metal
screen portion of your terrarium and NOT over any glass, plastic
parts, or other flammable material. Failure to do so could result
in a possible fire hazard.
4. Keep unit out of reach of children. Keep unit away from curtains
or other flammable objects.
Distributed by:
Canada: Rolf C. Hagen Inc., Montreal, QC H9X 0A2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp., Mansfield MA. 02048
Service
If you have any problem or question about the operation of this prod-
uct, please let us try to help you before you return the product to your
dealer. Most problems can be handled promptly with a phone call.
When you call (e-mail or write), please have all relevant information
such as model number and/or part numbers available, as well as the
nature of the problem. Call our Customer Service Department:
Canada:
Toll Free Number 1-800-554HAGEN (1-800-554-2436)
Between 9:00 am and 4:30 pm (Eastern Time)
U.S.A. :
Toll Free Number 1-800-724-2436
Between 9:00 am and 4:00 pm (Eastern Time)
For Authorized Warranty Repair Service: return Light Dome with
dated receipt and reason for return to:
C