Jotul F 100 Manual De Uso página 16

ENGLISH
Table of contents
Installation manual with technical data
1.0 Relationship to the authorities ...................16
2.0 Technical data ...............................................16
3.0 Installation .................................................. 17
4.0 Service ...........................................................19
5.0 Optional Equipment ....................................19
Figures ................................................................... 40
Table of contents
General use and maintenance manual
6.0 Safety precautions
7.0 Choice of fuel
8.0 Use
9.0 Maintenance
10.0 Operational problems - troubleshooting
Product:
On all our products there is a label
Jøtul
Room heater fired by solid fuel
indicating the serial number and
Standard : year. Write this number in the
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products : place indicated in the installation
Flue gas temperature :
Nominal heat output :
Efficiency
: instructions.
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number when
Country Classification Certificate/ Approved by
standard
contacting your retailer or Jøtul.
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
16
Serial no.
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those which refer to national
and European standards, must be observed when installing the
product.
Both an installation manual with technical data and a manual
on general use and maintenance are enclosed with the product.
The installation can only be used after it has been inspected by
a qualified inspector.
A name plate of heat-resistant material is affixed to the
product. This contains information about identification and
documentation for the product.
2.0 Technical data
Material:
Finish:
Fuel:
Log length, max.:
Flue outlet:
Flue pipe dimension:
- inside :
- outside :
Approx. weight:
Optional equipment:
Dimensions, distances etc.:
Technical data according to EN 13240
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emission (13% O ):
2
Flue gas temperature:
Operational mode:
Intermittent combustion in this context means normal use of the
fireplace, i.e. fuel is added as soon as the fuel has burnt down to
a suitable amount of embers.
Cast iron
Enamel or black paint
Wood
40 cm
Top and rear
Ø125 mm/123 cm 2 cross
section
2
Ø 150mm/177 cm cross
section
97 kg
Enamelled floor plate,
long legs, extra heat shield
See fig. 1
5,0 kW
5,0 g/sec
12 Pa
78%@6,1 kW
0,18%
o
298 C
Intermittent