Observe all local plumbing codes.
Make sure water supply is shut off.
Read these instructions carefully to ensure proper installation.
TOTO
reserves the right to update product design without notice.
®
Check to make sure you have the following parts indicated below:
TS100B1
TS100B1L
For safe operation of the showerhead, please observe the following:
Recommended operating pressure:
Minimum Pressure........20 psi (0.14 MPa), dynamic
Maximum Pressure.......80 psi (0.55 MPa), static
If soldering during installation, do not apply excessive heat to the valve
body.
Excessive heat may damage the internal seals and plastic components.
Do not use the product at an ambient temperature below 32°F (0°C).
BEFORE INSTALLATION
Mounting Screws
Escutcheon
Shower Arm
Set
Screw
Gasket
Flow
Regulator
(installed)
Showerhead
WARNINGS
TS930A1
TS930A1L
3
Mounting
Bracket &
Hardware