Insert The Batteries - TFA Dostmann 60.2536 Instrucciones De Uso

TFA_No. 60.2536_Anleitung
Radio-controlled alarm clock
• Batteries contain harmful acids. Low batteries should be changed as
soon as possible to prevent damage caused by leaking. Never use a
combination of old and new batteries together, nor batteries of dif-
ferent types. Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
Important information on product safety!
• Do not expose your device to extreme temperatures, vibrations or
shocks.
• Protect it from moisture.
5. Elements
Display (Fig. 1)
A: Time signal symbol
B: Time
C: Date and weekday
D: Temperature
E: Alarm 1-4
Buttons (Fig. 1-3)
F: TIME SET button
G: – button
20
28.04.2016 14:17 Uhr Seite 11
Radio-controlled alarm clock
H: + button
I: ALARM SET button
J: RESET button
K: Switch ON/OFF AUTO LIGHT
L: SNOOZE/LIGHT contact on the top
M: Switch ALARM 1-4 ON/OFF
Housing (Fig. 1+2)
N: Light sensor
O: Battery compartment
6. Getting started

6.1 Insert the batteries

• Open the battery compartment and insert two new AA 1.5 V batte-
ries, polarity as illustrated.
• Close the battery compartment again.
• The device will alert you with a beep and all segments will be dis-
played for a short moment.
• The clock will now scan the DCF frequency signal and the DCF sym-
bol will be flashing on the display. When the time code is successful-
ly received after 3-5 minutes, the radio-controlled time and the DCF
symbol will be shown steadily on the display.
• In Daylight Saving Time, DST is shown on the display.
• If reception is not possible, you can start the initialization manually.
21