JVC KD-ADV7380 Manual De Instrucciones página 45

Menu Item
MONITOR TYPE
OSD POSITION
FILE TYPE (DISC) Select the file type to play.
FILE TYPE (USB) Select the file type to play.
DIGITAL AUDIO
OUTPUT
DOWN MIX
D. RANGE
COMPRESSION
DivX
REGISTRATION
Setting
Select the monitor type to watch a wide screen picture on your monitor.
Select the on-screen bar position on the monitor.
• 1 : Higher position
• 2 : Lower position (Guidance below the disc setup menu will disappear.)
• AUDIO : Play MP3/WMA/AAC/WAV files.
• VIDEO : Play DivX/MPEG Video files.
• AUDIO : Play MP3/WMA/AAC/WAV files.
• VIDEO : Play DivX/MPEG Video files.
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
• OFF
• PCM ONLY
• DOLBY DIGITAL/PCM
• STREAM/PCM
When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when
"PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
• STEREO
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO
• ON
This unit has its own Registration Code. Once you have played back a disc in which
the Registration Code recorded, this unit's Registration Code is overwritten for
copyright protection.
: Cancels.
: Select for an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or when
connecting to a recording device.
: Select for an amplifier or a decoder compatible
with Dolby Digital.
: Select for an amplifier or a decoder compatible
with Dolby Digital, DTS, and MPEG Audio.
connecting an amplifier compatible with Dolby
Surround.
: Normally select this.
: Select to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel
software).
: Select to always use this function.
SETTINGS 45