Title Assignment - JVC KD-ADV7380 Manual De Instrucciones

iPod or D. player
• When you turn on this unit, the iPod or D. player is
charged through this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are disabled.
Perform all operations from this unit.
• The text information may not be displayed correctly.
• If the text information includes more than 8
characters, it scrolls on the display. This unit can
display up to 40 characters.
Notice:
When operating an iPod or a D. player, some
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/
car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>

Title assignment

• If you try to assign titles to more than 30 station
frequencies, "NAMEFULL" appears. Delete unwanted
titles before assignment.
General settings—PSM
• "AUTO" setting for "DIMMER" may not work correctly
on some vehicles, particularly on those having a
control dial for dimming.
In this case, change the "DIMMER" setting to any
other than "AUTO."
• If you change the "AMP GAIN" setting from
"HIGH PWR" to "LOW PWR" while the volume level
is set higher than "VOL 30," the unit automatically
changes the volume level to "VOL 30."
52
Setup menu
• When the language you have selected is not recorded
on a file, the original language is automatically
used as the initial language. In addition, the initial
languages settings will not work as you set due to
their internal programming.
• When you select "16:9" for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
• Even if "4:3 PAN SCAN" is selected, the screen size
may become "4:3 LETTERBOX" for some files.
About sounds reproduced through the rear
terminals
• Through the analog terminals (Speaker out/
LINE OUT/2nd AUDIO OUT): 2-channel signal is
emitted. When playing a multi-channel encoded
disc, multi-channel signals are downmixed. DTS
sound cannot be reproduced. (AUDIO—DOWN
MIX: see page 45.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS,
MPEG Audio) are emitted through this terminal.
(For more details, see table on page 53.)
To reproduce multi-channel sounds such as
Dolby Digital, DTS, and MPEG Audio, connect an
amplifier or a decoder compatible with these
multi-channel sources to this terminal, and set
"DIGITAL AUDIO OUTPUT" correctly. (See page
45.)
• About Dual Zone:
Through the 2nd AUDIO OUT, 2-channel signal is
emitted. When playing a multi-channel encoded
disc, multi-channel signals are downmixed. (See
page 28.)