Registering Songs Stations Being Played Back (Preset Function); Registering A Song/Station By Remote Control; Recalling A Registered Song/Station By Remote Control - Yamaha NX-N500 Manual De Instrucciones

Registering songs stations being played back (Preset function)

Up to 40 albums or songs stored on the PC/NAS , Internet radio stations and streaming stations can be registered on this unit
and easily recalled at any time (when using the MusicCast CONTROLLER).
The first 6 presets can be registered/recalled by using this unit's remote control.
• For details on the procedures to register/recall with MusicCast CONTROLLER, refer to the app's instructions.
Registering a song/station by
remote control
1
Play the song/station to be registered.
2
Hold down any of PRESET 1 to 6 on the remote
control for 5 seconds.
When the registration is finished, the status indicator on
the front panel flashes twice in green.
Left speaker (rear panel)
• If the status indicator flashes twice in red, the selected song/station
cannot be registered. Try with a different song/station.
• If PRESET where a song/station has already been registered is held
down for 5 seconds, the previous setting is overwritten.
22
En
PRESET 1 to 6
Green
(flashing twice)
Recalling a registered song/station
by remote control
1
On the remote control, press PRESET where the
song/station is registered.
• If the registered PRESET is pressed while the unit is in standby
mode, the unit automatically turns on, and the registered song/
station is played.