Remote Control; Replacing The Battery - Yamaha NX-N500 Manual De Instrucciones

Ocultar thumbs Ver también para NX-N500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote control

a Input source selection keys
Select the input source for playback. The selected input
source is indicated by the status indicator on the front
panel (p.6).
Bluetooth input
(Bluetooth)
NET
Network input
USB
USB jack
OPT
OPTICAL jack
AUX
AUX jack
• To select network content, use the dedicated "MusicCast CONTROLLER"
app for mobile devices. When NET is pressed, the previously played
network content will be played back.
b Volume adjustment keys
+/–
Adjust the volume for playback.
Mutes the speaker output.
(mute)
• To set the maximum volume, adjust the GAIN knob on the rear panel
(p.7).
c PRESET
Registers (presets) PC/NAS albums or songs, Internet
radio stations and streaming stations on this unit. After a
song/station is registered, it can be played back by simply
pressing this key (p.22).
d WPS
Sets up a wireless connection to the network (p.16).
• In order to connect to the network using WPS, a wireless router (or
access point) with the WPS function is required.
8
En
a
b
c
d
e z (power)
• To turn the main power on/off, use the z (power) switch on the rear
panel (p.7).
f CONNECT
■ Operating by remote control
Approximately
6 m (20 ft)

■ Replacing the battery

• Check the "+" of the battery and insert it the correct way
around.
• While pushing the release tab in direction Ⓐ, slide out the
battery holder in direction Ⓑ.
e
f
Turns on/off (standby) the unit.
Lets you operate the unit with the dedicated "MusicCast
CONTROLLER" app for mobile devices (p.12).
Use the remote control by directing it toward the remote
control sensor on the left speaker.
CR2025 type
lithium battery

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido