Blaupunkt Concept Pro II Detroit 2024 Instrucciones De Manejo página 40

Bluetooth®
u Press the
button
ognition.
- or -
u Press the
button
onds to activate the voice recognition with
the speed dial.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
u Say the name of the desired calling partner.
Notes:
• If no Bluetooth® connection is established
when voice recognition is activated, the
display briefl y shows "VOICE DIAL FAILED".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefl y shows
"VOICE DIAL FAILED".
• You can cancel the voice recognition by
pressing the
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
Storing a phone number in the car sound
system
You can store fi ve phone numbers in the car sound
system and place calls with the speed dial (see the
following section).
u Enter the phone number as described in the
section "Making a call".
u Press the desired memory button 1 - 5
approx. 2 seconds to store the number.
You can now enter a name with up to 15 char-
acters:
u Turn the volume control
acter for the respective position.
u Press the
or button
or previous position.
Note:
You can also reach the next position by press-
ing the ON/Off button
40
7
to activate voice rec-
@
for approx. 2 sec-
?
button .
<
for
4
to select a char-
7
to reach the next
2
.
u Press the memory button 1 - 5
approx. 2 seconds to store the number and
name.
The display briefl y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Note:
A number previously stored on the memory
button is replaced.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without fi rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
u press the
button
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
u Press the
button
"CALLING" and the dialed number are alter-
nately shown on the display.
To call a stored number,
u press the
button
u Press a memory button 1 - 5
stored number.
Note:
If no number is stored under the selected
memory button, the display briefl y shows
"NO NUMBER".
u Press the
button
"CALLING" and the dialed number are alter-
nately shown on the display.
To call any number,
u press the
button
u Press the On/Off button
menu and enter a number (enter the phone
number as described in the section "Making
a call").
<
again for
@
.
@
to call the number.
@
.
<
to call the
@
to call the number.
@
.
2
to open the entry