Philips Sonicare 3 Serie Manual De Instrucciones página 12

ENGLISH
12
Smartimer
The Smartimer indicates that your brushing cycle is complete when it
automatically switches off the toothbrush at the end of the brushing cycle.
Dentists recommend brushing at least 2 minutes twice a day.
Note: After brushing for 1.5 seconds, pressing the power on/off button causes
the toothbrush to pause. After a pause of 30 seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to let you get used to brushing with the Sonicare.
The Easy-Start feature only works at the High intensity level.
This Sonicare model comes with the Easy-start feature deactivated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 Activate or deactivate Easy-start:
To activate Easy-start: Press and hold the power on/off button for
,
2 seconds. You hear 2 beeps and the battery level indicator flashes
green to indicate that the Easy-start feature has been activated.
To deactivate Easy-start: Press and hold the power on/off button
,
for 2 seconds. You hear 1 beep and the battery level indicator
flashes yellow to indicate that the Easy-start feature has been
deactivated.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.